Morris Lubricants Race Foam Filter Oil

From 13.00 (ex.vat)

To download technical data and material safety data sheets, please go to and enter the product code in product search.

Want a discount? Become a member.
SKU: FFO Categories: , Tag:

Main application: Recommended for the treatment of all foam filters, particularly those on racing and motocross competition motorcycles. User Instructions Cleaning the filter. A water rinseable degreaser such as MLR Foam Filter Cleaner should be used. Allow to dry. Treating a new or cleaned filter. Apply Race Foam Filter Oil sparingly, but ensure full coverage. Wear protective gloves when squeezing out excess oil and allow to dry for 15 minutes before running engine. Service intervals for foam filters should be in accordance with the engine manufacturers’ recommendations.


Morris Lubricants Race Foam Filter Oil

Race Foam Filter Oil is the first choice for high performance engines both on and off road and under the most severe of racing conditions, when enormous amounts of air are breathed through the engine in a very short space of time.

Race Foam Filter Oil remains sticky at all times, trapping airborne dirt and abrasive dust in the pores of the filter allowing the engine to breath only clean air. This is most important on dirty or sandy circuits where airborne particles could quickly ruin engine performance and cause costly failures. Filters correctly serviced with Race Foam Filter Oil will ensure engines remain in tune longer with increased maintenance intervals.

Physical Characteristics:
After solvent evaporation
Appearance Green/Blue Liquid
Relative Density @ 15.6°C 0.916
Kinematic Viscosity @ 40°C (cSt) 2760
Kinematic Viscosity @ 100°C (cSt) 105.4
Viscosity Index 100
Closed Flash Point (°C) 210
Figures based on average production values

Additional information

Dimensions 5169860 cm
Pack Sizes

1 Litre

Newsletter Sign Up

Subscribe now and get special offers